Fencing and Steel Supply from Qingdao

Relia Fence is operated by Qingdao Relia Industries Co., Ltd. in Qingdao, China. We discuss steel fencing, posts, mesh, barriers, grating and gabions for project and wholesale orders. Bring your drawing or an existing part reference so the offer can identify the items, checks and packing that apply to your purchase.

Business reference
Qingdao Relia Industries Co., Ltd., Qingdao, Shandong, China
Useful enquiry input
The buyer's drawing, required quantity, destination and acceptance evidence
Portable galvanized frames, green welded mesh and bundled steel posts

Drawings and samples give us a common reference

A catalogue width or mesh size gets the conversation started. For a production quote, mark the actual aperture, wire and profile dimensions you buy by. If you need to replace parts, send an end-view photo and a measurement of the original connection so we can compare a candidate. Relia uses the references you provide to discuss which item and fitting details belong in the quotation.

Welded panel samples on a bench for an aperture and wire comparison
Product selection
Start with a catalogue reference or the actual retained part.
Drawing review
Identify the approved dimension, mounting detail and finish for the assembly.
Order evidence
Request a model-specific drawing, sample or dimensional record useful at receiving.

Build a supplier record from the order itself

Start with the trading details, then connect them to a proposed item, its evidence and the people who will receive it. This gives a buyer a practical record for due diligence and repeat purchasing.

Review the evidence to ask for
Four records for your supplier review
  1. Company contact
    Use Qingdao Relia Industries Co., Ltd. and the published company contact details in your enquiry.
  2. Item reference
    Record the chosen drawing revision or catalogue model and the matching fittings.
  3. Agreed evidence
    Ask what sample, dimensional or finish evidence applies to the exact items in the quotation.
  4. Dispatch reference
    Confirm the bundle, carton and packing marks the receiving team can match to the purchase.

The product families we can discuss with you

These examples show different kinds of supply. Put the selected dimensions, finish and hardware in the order line so each option can be identified. Choose a product line with its dimensions and matching hardware before combining quantities or requesting options.

FamilyA catalogue exampleUseful drawing detail
Temporary construction fencing
2100 × 2400 mm temporary panel with 60 × 150 mm listed mesh
Frame, base, coupler and supporting arrangement
Welded mesh systems
50 × 100 mm V-bend mesh with a 3.0 mm example
Finished width, mounting and matched clips
Double-wire fencing
656 and 868 twin-wire panel family with 6/5/6 and 8/6/8 mm choices listed
Exact wire sequence and support drawing
Related steel components
Industrial bar grating with 30/40/60/100 mm bearing pitch options
Bearing section, span, finish and required records

Finishes and fittings belong to the same order

You might want the colour of a mesh panel to match its caps and hardware. Give us the part list and the selected coating sequence. If separate catalogue fields use different terms, the written item and approved reference sample should establish what we quote. Ask which finish and fitting options apply to each chosen model, then record the agreed result by line.

Distinct coated fence materials and a mesh sample ready for a finish comparison

Evidence you can use to compare an offer

Tell us early if a tender asks for drawings, samples, inspection reports or proof of compliance with a named standard. The required evidence depends on the part and application. Use the issued quotation and approved drawing to identify the scope of each document or sample you will check.

Trace company and item details together. Put Qingdao Relia Industries Co., Ltd. on the enquiry and match it to the issuer of the quotation. The mixed-order records guide shows where to attach the selected item, drawing revision, sample or inspection reference and packing mark. Check the actual documents issued for your order before approval.

What to agree when placing a drawing-based order
  1. Start with these inputsDocument the part before selecting a finish

    Use the catalogue reference, drawing or retained sample. Write down the intended assembly and which dimensions control its fit.

  2. Specify the orderAgree which checks belong to the quoted model

    Compare materials and finishes by item. Use a sample or drawing revision where two options look similar but use different hardware.

  3. Verify before releaseUse documents that identify the part

    Request a drawing, sample or dimension record linked to the quoted item. Keep the same reference on the release and packing list.

  • DimensionsProduct drawing with individual parts and measuring datums.
  • MaterialsFinish and material details tied to the selected configuration.
  • AcceptanceMatch the agreed sample, drawing and required evidence before release.

Packaging follows the way you receive the parts

Give us the delivery destination and how you plan to unload or stage the shipment. Separate long posts, panels and cartons of fittings in the packing request. Ask for the pack dimensions and quantity by item when you compare offers. Send unloading and sorting constraints early so packing can be discussed alongside the items.

Individually bundled posts and framed fence panels ready for packing review

Useful next steps by buyer task

Product sourcing, order evidence and direct contact each have a place in the purchase process. Choose the guide that matches your current step, such as checking a part, planning a site or preparing a quote.

Company details and enquiry channels

Use the company name below for correspondence and identify the project or quotation in your message. Use the published contact details and reference the quote or project in purchase correspondence.

Company detailReference
Legal entity
Qingdao Relia Industries Co., Ltd.
Company address
Shuyuan Road, Qingdao, Shandong, China
Project enquiries
Contact and drawings

Bring the part, drawing or catalogue reference

Send a model, drawing or picture of the part you want, and include the buyer, quantity and delivery destination so the enquiry can be tied to a specific project.

Product or use
Name and link
Drawing and sample
Revision and required checks
Supply
Quantities and destination
Qingdao Relia Industries Co., Ltd.Shuyuan Road, Qingdao, Shandong, China