Wholesale Chain-Link Rolls and Replacement Fabric
Quote chain-link stock by fence run before grouping identical rolls into a purchase line. Record the aperture, wire size, finish, roll height and coverage, then list tension parts and terminal fittings. Relia can compare the available roll candidates using one field survey and the finish you select.
- Buying unit
- A compatible roll specification and its end fittings
- Replacement proof
- A short fabric sample and the retained post and rail dimensions

One line for each compatible roll and fitting set
Relia supplies chain-link roll options for bulk orders and repairs. Our 8 ft listing offers several roll lengths. We can work from your cut schedule and retained fittings to identify the fabric height, wire construction and compatibility checks that belong on your order.
Compare the 8 ft chain-link roll lengthsSet the quantities using lengths between terminal posts. Separate fabric, tension bars, bands and post fittings. Define the wire measurement so the coated and galvanized offers describe comparable steel and finish. Use a compatible accessory line for each roll specification even where two runs meet at a terminal.
| Specification | Stock order | Replacement order |
|---|---|---|
| Fabric | List height, diamond aperture, selvage and selected roll length | Measure original height and the opening in an undamaged bay |
| Wire and finish | State core diameter and finished diameter if coated | Agree surface sequence and colour against retained fence |
| Post and rail | Record OD and fitting type by stock line | Measure retained terminals, OD, wall and band sizes |
| Cut and receipt | Sum runs using agreed cut and spare allowances | Keep each end detail and repair section tied to its roll ID |
- New run
- Quote fabric height, diamond opening and roll length alongside the terminal and rail fittings.
- Existing run
- Measure a spare or undamaged bay and match the end bars and bands.
- Before comparing finishes
- Ask for the steel-core diameter and the finished diameter for coated wire.
A cut and stock plan for chain-link rolls
Keep repairs, corners and uninterrupted runs visible in the same takeoff. Use the filled schedule to ask for roll quantities, matching end fittings and receiving marks.
Check which runs need their own cut plan- Straight runRecord the usable length between terminals and the required fence height.
- Retained interfaceNote the wire and opening, existing tension bar and the post or rail that stays.
- Roll allocationMark which lengths can use stock roll sizes and where the installer needs an identified cut.
- Receiving markPut the wire, mesh, height and finish on the bundle or roll reference.
A finish name can cover different products
One 8 ft, 50 mm diamond listing says galvanized in the title and describes galvanized then PVC-coated in the specification. Tell us the exact finish you want quoted. Confirm whether wire diameter refers to steel core or coated wire. Specify the coating description and chosen colour as separate fields so receiving can check both.

Roll labels for warehouse stock
Set the repeat order up with a label that the receiving team can identify without opening the entire bundle. Keep a product reference on the roll label for the next stocking or repair order.
- Roll height and lengthRecord both measurements with units.
- Mesh and coatingUse aperture, finish and wire definition.
- Order referenceKeep the product and approved drawing or sample on the label.
Keep sound posts and rails in the repair plan
Photograph the old terminals and top rail. Measure between the points where tension fittings connect, then record any sloped segments. We can examine how a proposed roll would meet the existing edges. Mark sound rails and posts on the repair section before measuring terminal fittings.

Separate the runs before calculating roll quantities
Small breaks at openings, offsets and corners change the materials list. Break the takeoff at gates, corners and finishing points to keep the stock plan practical.
- MapWalk the fence and record every end point.
- MeasureCheck height, length and tension fitting positions.
- OrderList fabric and fittings by run.
The end fitting sets up the final check
Use an end bay to confirm that wire, tension bar and retained post align. Get the actual fitting drawing when the order keeps older parts in service. Use the actual tension bar and clamp type as the reference when checking the rolled fabric.
Compare the roll and its retained terminal. The 8 ft utility chain-link listing and 6 ft park chain-link listing share a 50 mm diamond reference. The quote should record the chosen wire and coating alongside roll height. Bring the retained tension bar for a fitted check and assign a matching fitting code on the parts list.

Wire coating, weaving and roll inspection
Helically formed wires interlock to create a diamond mesh. Steel core, finished diameter and opening each describe a different part of the finished fabric. Ask for geometry and roll checks against the selected wire and finish options.
- Material and dimensionsCompare the finished wire with the steel core
Agree the two diameters where a polymer coat is specified. Record the selected diamond opening separately.
- Fabrication and fitConfirm weave and end detail
Use the agreed fabric height, opening method and selvage. The edge type controls what you can reuse at a terminal.
- Inspection evidenceCheck one roll against a retained connection
Use a representative uncoiled section for the measurements. Identify its roll length, finish and the matching bands or end bar.
Detailed checks for this order
- Specify wire and coating orderFor zinc-coated fabric, record the quoted route before or after weaving where the specification allows it. For a polymer-coated model, request the core diameter, finished diameter and layer sequence for the exact item.
- Weave to the selected height and openingConfirm the opening measurement method, the nominal height and the edge treatment. Keep dimension checks for an uncoiled length on a flat surface.
- Identify cuts and hardware by runCoil to the ordered length. Label roll height, length, finish and lot. Use a trial end connection on a representative repair bay before releasing the rest of the rolls.
CLFMI chain-link fabric product manual · ASTM polymer-coated chain-link fabric specification
Roll choices and the coating difference
The utility product title uses galvanized, while the treatment field names galvanized followed by PVC. Specify the finish on your line item. ASTM lists zinc-coated and polymer-coated fabric as separate specifications, so cite the project edition and ask for supporting documents only where applicable. Treat the examples as candidate specifications and confirm the wire convention that applies to the offer.
- Listed data
- 50 mm diamond example, 10/15/20/25/30/50 m roll lengths and 32–89 mm round post or rail diameter choices listed
- Confirm before order
- Coating sequence, roll length and end-fitting sizes for the 8 ft line
- Listed data
- 50 mm diamond example, galvanized then PVC finish in the treatment field and 1.2–5.0 mm selectable wire range
- Confirm before order
- Core and coated diameter by chosen configuration, colour and stock labels
ASTM chain-link fabric specifications · ASTM F567 chain-link installation practice
Browse related products · Chain-Link Fencing
Add privacy or check farmland use
A slat or screen adds a different set of conditions. For a smaller opening in livestock areas, review the mesh and bottom edge as a separate enclosure brief. Use the screening or livestock guide if privacy or the animal-side opening drives the choice.
- If the run needs privacyChain-Link Privacy Slats and Screens for Warehouse YardsCheck the finished mesh against a slat sample before updating the loading and support brief.
- If only part of the yard needs chain-link3D Welded Mesh and Chain-Link for Warehouse PerimetersCompare the flexible and rigid runs on one layout.
Send roll sizes and retained hardware details
Send the runs between terminals, roll height, mesh size, wire and selected finish. Show the existing fittings where the new fabric ties in.
- Fabric
- Height, aperture and wire
- Fittings
- Existing and required connections
- Order
- Roll quantities and stated finish
Shuyuan Road, Qingdao, Shandong, China
- [email protected]
- +1 404 203 0971
- Phone
- +86 18561762631
