China Fence Manufacturer for Wholesale and Project Orders

Use one line per panel, post and fitting family when you request a mixed fence order from Relia in Qingdao. Start with the intended site, unit dimensions and split quantities. An approved drawing, a fitted sample and a packing schedule help you compare quotes and check that the parts arrive together.

Best starting document
A line list divided by family and site zone
Release reference
A drawing revision tied to the sample, checks and packing marks
Galvanized temporary panels and green welded mesh staged on separate racks

The quote sheet for a mixed order

Relia can review temporary panels, 3D welded mesh and loose posts on one enquiry. We keep the configurations, finishes and pack counts separate, so your quote shows which fittings go with each assembly and which measurements belong on the receiving sheet.

Start with the 2.1 m temporary-panel specification

Hold the drawing revision steady across all your quote comparisons. This is a worked purchase sheet format. Final quantities come from your measured runs, gates, returns and agreed spares. For mixed-spec lines give each zone its own item code before combining its quantities with the rest of the order.

LineSupply unit and specificationDocument to agree
Temporary panels
Count each 2100 × 2400 mm reference panel and its feet, couplers and braces as separate items
Assembly drawing and pack count
V-bend mesh
Select a width, aperture and wire before pricing the post and clamp
Dimensioned panel and matching post layout
Loose posts and fittings
Identify length and section for each post and name the matching fitting by line
Separate piece count with sample or drawing revision
Temporary boundary
Count complete bays. Put the panel, foot, coupler and brace on separate lines.
Permanent run
Start with the panel geometry and post centres on an elevation.
Mixed shipment
Group packing and check records by assembly and drawing revision.

One reference follows the order

The evidence for a mixed purchase stays readable when the buyer can trace an individual item through the quote, sample, inspection and container plan.

See how records are used in production
Trace a panel and its fittings through four records
  1. Quote line
    Name the panel, its mating post, the fitting count and the drawing revision in the same row.
  2. Sample record
    Photograph the assembled interface beside a scale and record the accepted finish.
  3. Inspection record
    Match each agreed check to the item reference and keep the measured value with the approved tolerance.
  4. Packing mark
    Carry the item and zone references onto the bundles and loose hardware cartons.

A sample makes your specification tangible

You can use a sample to pin down the mesh opening, edge profile and finish before the full order. Send a revision identifier with the sample request. We can discuss which faces and connection points need to match your drawing. Save a dated photo of the accepted assembly so the sample can be identified after it leaves the workshop.

Wire intersections and a finished frame at a sample inspection bench

A quote you can compare line by line

One complete list saves a second round of questions when you are comparing two configurations for the same job. Use the same unit of sale across competing offers and reconcile any quotation that separates fittings into a second package.

  • Panel lineGive height, width, aperture and wire size with units.
  • Post lineRecord total length, connection pattern and mounting.
  • Fitting lineItemize each base, clamp, brace or fastener.

Your packing list follows the product mix

Keep long posts, wide mesh panels and small accessories as distinct lines. Tell us which parts go to the same installer or warehouse. That lets us discuss pack dimensions, labels and order quantities for each group. Pair the pallet count with a separate carton count where clips and fasteners arrive loose.

Separate post and temporary-panel bundles staged for a mixed order

Keep the order tied to one approved revision

A clear handoff matters when your installer, warehouse and buyer all use the order. Record a drawing revision change on the affected line and carry it through the packing and inspection references.

  1. DrawingDate the layout and bill of materials.
  2. SampleIdentify the agreed specimen or dimensional record.
  3. Repeat orderRetain the reference and list any change in finish, profile or quantity.

The inspection points travel with the order

Put the important checks in writing before accepting a quote. These might include finished height, wire dimensions, a mounting interface or the finish on exposed parts. We can review the documents or sample evidence available for the models you choose. Specify the measurements you want to see by line item, especially interfaces reused across multiple products.

Trace each check to a purchase line. A mixed order may include an Australian temporary panel and a 50 × 100 mm welded-mesh panel. Give the two assemblies separate inspection references. On the signed record, identify the accepted drawing revision, the part measured and the bundle label that receiving will match.

A wrapped welded mesh pack with its upright edges protected

Production records for a mixed fence order

A mixed order brings together fabricated frames, formed welded mesh and cut or punched posts. The production and receipt records should identify each part by item number, drawing revision and finish. Agree who receives the batch checks and when they are due in relation to the order release.

One order with separate manufacturing and receiving checks
  1. Material and dimensionsStart with the line list

    Give temporary frames, welded panels and loose posts their own drawing, quantity and finish. Identify which fittings travel with each assembly.

  2. Fabrication and fitKeep the process clear by item

    A joined frame, a V-bend grid and a punched post each have different points to measure. Specify the zinc route part by part.

  3. Inspection evidenceMatch the result to the order

    Use pack labels and a dimension record with the same item and drawing revision. Your receiver can then check the right pieces against the right tolerance.

Detailed checks for this order
  1. Release one drawing per itemUse the outside frame dimensions for temporary bays and panel width plus post centres for permanent runs. List each base, brace, clamp and pack unit separately.
  2. Separate the production routesTemporary bays start with frame and infill dimensions. V-bend panels have a welded grid and formed ribs. Loose posts have their own length, hole or attachment details. Confirm the route and inspection scope for each line.
  3. Specify the finish by componentRelia uses both pre-galvanized material and hot-dip galvanizing after fabrication, depending on model or order. Put the applicable route and any topcoat against panels, posts and hardware individually.
  4. Give receiving a record it can useRequest a dimension check with drawing revision, sample or lot ID, measured value and tolerance. Tie that ID to the pack label so the receiver can find the correct parts before installation.

TWI guidance on resistance welding · American Galvanizers Association on galvanizing routes

Catalogue models and the information they establish

The product records below are starting dimensions for a quote. The selected configuration, coating, tolerances, test paperwork and delivery terms belong on the individual order line. Treat each model link as a starting specification and attach the actual selected option to the quote.

Browse related products · Temporary & Event Fencing · Welded Mesh & Chain-Link · Posts & Perimeter Accessories

From supplier shortlist to site requirements

For the individual assembly, start with the kit guide. For a site that changes use at handover, build the purchase around the two phases. Send a single zone schedule when site installers and warehouse receiving teams use different naming conventions.

Send the drawing and delivery destination

Send the line list, destination and target release date. Attach a sample photo or drawing revision and identify any inspection documents your project needs.

Order
Product families and quantities
Evidence
Drawing revision and sample needs
Destination
Delivery market and packing preference
Qingdao Relia Industries Co., Ltd.

Shuyuan Road, Qingdao, Shandong, China

About our fence business