100 mm Pitch Steel Grating with 10 mm Cross Bars for Industrial Walkways, Galvanized or Powder Coated
Build your project quote
Tell our Qingdao team what you’re planning. A drawing or site photo helps us check the fit and quote the right configuration.
- Send your briefSize, quantity and delivery destination.
- Check the fitCheck the bearing direction, clear span and supports.
- Plan the orderReview packing and production lead time for your order.
-
TypeSteel GratingWarrantyMore Than 5 Years
-
FeatureAnti-Corrosion, Water Resistant, DurableShapeRound, Square
-
After-sale ServiceOnline Technical SupportWeightAs your required
-
Chemical CompositionSteelLengthCustomized
-
Alloy Or NotIs AlloySecondary Or NotNon-Secondary
-
Project Solution Capabilitygraphic design, 3D model design, total solution for projectsApplicationFloor, walkway, drainage system, Warehouse, Workshop, Outdoor, Warehouse,workshop,chemical plant platform etc
-
Design StyleIndustrial
-
MaterialCarbon Steel, Stainless Steel, Stainless Steel, Carbon Steel, Galvanized SteelColorSilver, Gray, as your required, Silver,black,or your required
-
Surface TreatmentCoated, Zinc CoatingProduct nameMetal Steel Grating
-
Surface treatmentStainless Steel or Galvanized or Powder CoatingBearing bar253,255,303,325,405,553,655
-
Bearing bar pitch30,40,60,100mm, CustomizedCross bar6,8,10mm, Customized
-
Cross bar pitch24 - 200mm, CustomizedCertificationCE, ISO 9001,14001,45001
When comparing steel grating for a walkway, keep the 100 mm bearing bar pitch and 10 mm cross-bar size separate. The first specifies spacing in the bearing-bar direction and the second describes a different component. Use both on an enquiry so the panel can be matched to your drawing.
Which dimensions identify this panel?
Start with the 100 mm bearing bar pitch and 10 mm cross bars. The specification also gives a separate cross-bar pitch range of 24–200 mm. If you are matching an existing installation, send the required pitch in both directions, the panel dimensions and which way the bearing bars should run.
What finish should I specify?
Galvanized and powder-coated finishes are listed for this steel grating family. State which finish you want and give the intended environment. A walkway in a workshop and a panel next to a drainage channel may call for different choices, even when the bar dimensions are the same.
What goes on a replacement drawing?
Supply the clear opening, panel length and width, and the locations of the supporting edges. Include the loading requirement for the industrial walkway or platform so it can be reviewed for the panel and support arrangement. If your dimensions are for a replacement section, mark which side faces the adjoining grating and where the panels meet.

Include your delivery destination and any packing, documentation or scheduling requirements in the inquiry. Confirm delivery arrangements and terms in your written project quote.
